Shaped Bricks : Instructions for Use

1. Before use your Shaped Bricks should be soaked in water and left to drain on kitchen towel or similar.
2. Your bricks can be laid just like a full sized brick using our Mortar/Grout mix. Allow approx. 1mm joints.
3. Any gaps in joints can be grouted in once your project is completed. If you need to grout your wall, allow to dry for 24 hours, then coat with a 50/50 mix of PVA and water to seal the face of the bricks. Leave to dry, then grout using our Mortar/Grout mix, working it well into the joints and wiping clean with a cold damp cloth. DO NOT allow the grout to dry on the face of the bricks.
4. Cut your bricks using a craft knife or junior hacksaw or shape them by rubbing on a medium grade abrasive paper.