Kerbstones : Instructions for Use

1. Simply glue into position using PVA adhesive. Remember to leave approx. 1mm joints if you intend to grout them in.
2. Kerbs 3mm thick can be cut using a craft knife and ruler, simply score and snap over a straight edge. Kerbs 10mm thick can be cut using a junior hacksaw.
3. Instructions for grouting can be found on the packet of our Mortar/Grout mix. Please note. While other grouts can give satisfactory results some DO NOT. We therefore recommend the use of our Mortar/Grout to assure a reliable realistic finish.